Hello again.

Today we are taking a look at the Everlasting: Wet Palette Kickstarter.

​This is what you get with your pledge.

Why is it special?

1: They claim that the mold resistant foam will keep your paint ready to go for days in the airtight compartment.

2: It has a magnetically held ink and wash wavy well palette. So you can disconnect it for easy clean up.

3: It comes in two sizes, the smaller painter version and the large studio version. For me this is the reason to back the project I picked up a wet palette from AC Moore that is HUGE...takes up a huge amount of real estate on my paint table. So I am much more interested in the 15 x 20 cm (6" x 8") footprint of the Painter version.

Entry point is 25€ ($29.99 USD) which does not include shipping. The project is fully funded with more than 2,700 backers at this point with 22 days to go.

Full disclosure, I will be backing this project, will you? 

This Kickstarter is fully backed, sitting pretty at 948 backers to the tune of $720,092 with 15 days remaining (at the time of this post)! Not a shabby Kickstarter by any measure.

What is the Table of Ultimate Gaming?

If Geek Chic was the Lamborghini of gaming tables then the Table of Ultimate Gaming is at the very least a Ford Mustang GT Fastback. As you may have heard of the untimely demise of Geek Chic, there are still options for purchasing a quality gaming table (Google is our friend).

Breaking it down a bit, the 2.4 is the 2'x4', 3.5 is 3'x5' and the 4.6 is the 4'x6' table with a decent number of options available.

If you are not a DIYer sort and are looking for a reasonably priced entry point into getting your very own gaming table this may very well be the Kickstarter for you!

Did you miss me?

Well, I missed you!

Had a family emergency to deal with, which essentially deprived me of secured reliable internet for 6 weeks. Spent the last two weeks home, just decompressing and getting caught up on some the tasks that had piled up.

Good thing I made it back in time to get in on this Kickstarter and there is still time if you want to as well (as of this post 9 days).

What we are talking about today is the Fog Monster from Real Game FX. This machine does not use dry ice or chemical fog, instead utilizing ultrasonic atomization of liquids, in this case water (preferably filtered, purified, or demineralized water). 

"We have not found any problems from moisture build up on nonporous game pieces that use water or oil based paints. We have used wax paper under our set to protect any porous, wooden, or cardboard, table top surface from moisture."

"For players with wood, card game tiles and boards, paper or cardboard terrain. Fog is humid air. Fog will cause moisture build up.  Owners of paper or wood based game pieces should take moisture build-up into consideration before deciding to use fog in game as fog moisture may cause paper or wood based pieces to peel or warp."

There are three versions of the Fog Monster, I opted for the painted Dark Crypt version which looks like a tower.

Below is the standard Fog Monster and beneath that is the clear Fog Monster.

The project is fully funded and with a fair number of stretch goals all ready unlocked.

Let me know what you think of it.

As always, play games and have fun!

Jed is now offering up the Azure Dragon Dropship for Infinity. This detailed model is priced at 150 pounds sterling ($190.92 USD) which is not cheap by any means. However, I will let you be the judge of whether it is worth it or not.

Hayland Terrain is running a Kickstarter for their Universal Tile 3D Printing 28mm Tabletop Terrain, which is quite the title. The project is fully funded and at Stretch Goal #10 at the time of this writing. 

Backing up what is this Kickstarter?

Essentially this is all of the modern scenery bits that will make your table really pop! 

Full disclosure, I backed this project at the £40 pledge, so I will be getting all of the addons and stretch goals.

There are 15 days remaining on this Kickstarter, if you have a 3D printer and have an interest in modern and near future RPGs or wargaming this is the project that you didn't know you were waiting for.

What say you?

So I ran across this short little how to video on YouTube and it is so cool I thought you might be interested. 

It will work for sci-fi or fantasy equally well.

Thomarilion keeps putting out great products and I feel obligated in showcasing them here!

Catapulting to the number one spot is the Catapult, yeah I went there.

Coming in at 9.99 € (or $10.89 USD) with laser cut wood parts it is a relatively straight forward build and should be ready for you tabletop in short order.


Next we have The Dark Sovereign, also priced at 9.99 € (or $10.89 USD), ceramic casting is 60mm x 65mm (or 2.36" x 2.55"). It can certainly spruce up a spartan table.

Finally we have the Castle Fireplace, an essential when your adventurer's need to ward of a damp chill from a cool spring night. Priced at 5.25 € (or $5.73 USD) and constructed out of durable resin, it is certain to give that room a needed lived in feel.

Let me know what you think in the comments.

Until next time!

Fantasy Arc has recently released their first two models for this new line of laser cut terrain, the Elven Tree Fort and the Elven Staircase.

The Tree Fort is priced at $79.99 USD and the Elven Staircase fetches $99.99 USD. Obviously Elves don't live in the cheap side of town, however given the level of detail that these models incorporate their craftsmanship is on display. 

I have some concerns about the staircase and what I perceive as a lack of accessibility to place minis on the staircase itself. It certainly is quite the piece of scenery.

What say you?

While I was certainly disappointed that the Kickstarter for Arab Buildings didn't get funded, I am extremely pleased to report that their Normandy D-Day Kickstarter is fully funded with lots of great stretch goals already unlocked! You can get in on this campaign as it has 26 days to go at the time of publication.

For me, this combined with the WW2 buildings from Printable Scenery that I have purchased and printed out, will allow me to do a great 4 by 8 table for Bolt Action.

Top left picture shows the long house in 28mm and how it fits on an 8" printer bed.

Top right, you can see the Hotel Restaurant in 15mm, perfect for Flames of War.

Middle left, the massive 28mm Barn printed out in 2 parts on the print bed.

Middle right, the beefy 28mm Shed.

Bottom left, a sample of one house printed at 15mm, 1/72 (20mm) and 28mm.

I backed this campaign with the 40 Euro pledge, which entitles you to the base 6 buildings, garden walls, a well and an outhouse in addition to all of the stretch goals!

Plus...

If you have an interest in WW2 wargaming and a 3D printer this is a great campaign for you to jump in on...HERE!

It has been a while since I swung by Antenociti's Workshop and he certainly has been busy.

Starting things off we have the "Metro Terminus & Stop Signs". Priced at £23.00 ($28.49 USD), it is a multi-part set that has a combination of acrylic and resin pieces with pre-painted MDF.

One of the elements that I like about Infinity is the incredible color that they infuse into the table wargame genre, no doubt a result of the Anime derivation. That brings us to the "Avalon Tri-Ads Large". Priced at £22.00 ($27.25 US), these two triangular towers come with 6 different photo print quality adverts. When they say towers, they mean that these are scaled to be as tall as a three-story Infinity building!

If you need some more inspiration for your Infinity terrain or miniature painting please swing by my Pinterest board dedicated to Infinity: the wargame not the car.