Latham, at Burn In Designs, is on the verge of releasing a new line of laser cut buildings, the Metro City. With five buildings and a host of accessories, this scenery will nicely fit gaming needs from Pulp to Modern. These Brownstones have tons of character and will add tons of visual impact to your gaming table.
As I have noted previously, Latham does not use hardboard (aka MDF) instead opting for birch plywood for his kits, at least up to this point. This has the benefit of bypassing the splayed corners that happens when hardboard takes a hit. As with all such things though there is a trade off, as you may want to primer, sand, primer. Spraying primer will cause the wood fibers to expand slightly showing the wood grain which you can knock down with a quick sanding of 120 grit sand paper. The end result though is very impressive!
As I have noted previously, Latham does not use hardboard (aka MDF) instead opting for birch plywood for his kits, at least up to this point. This has the benefit of bypassing the splayed corners that happens when hardboard takes a hit. As with all such things though there is a trade off, as you may want to primer, sand, primer. Spraying primer will cause the wood fibers to expand slightly showing the wood grain which you can knock down with a quick sanding of 120 grit sand paper. The end result though is very impressive!
RSS Feed